Some articles on this site contain affiliate links. If you purchase through these links, we may earn a small commission at no additional cost to yourself.
Once again, I found myself in the middle of another home remodeling project when a small problem arose.
This time, I learned something new in the process — before this, I didn’t know anything about electrical outlet spacers!
I ran into this problem while I was installing new beadboard wainscoting in our kitchen and breakfast room.
The electrical outlets were recessed after I installed the wainscoting – and I wasn’t able to install the faceplate properly.
It’s a seemingly obvious problem, but it’s one small thing that I hadn’t thought about when planning out the project. (Then again, if there wasn’t some sort of hiccup during the course of a home DIY project, I wouldn’t know what to do with myself.)
I discovered that the electrical outlet needed to be pushed forward somehow, in order for it to become flush with the beadboard paneling.
I could loosen the screws on the electrical outlet to bring it forward — but that would leave it loose and that wasn’t an option.
Outlet Spacers To The Rescue
I headed to the home improvement center in search of a product that would solve my little dilemma.
I always assume that I’m not the first person to have the problem I’ve encountered. Therefore, I know that there will almost always be a product that will take care of my home remodeling problem. If there’s not a product, then I usually I find that a little improvisation and ingenuity will see me through.
I had something in mind that would be made of rubber or plastic — for fire and safety concerns. A UL listed product would be the way to go for peace of mind.
Turns out the solution for this type of problem is an affordable set of electrical outlet spacers!
TIP: Be sure to cut the power to the receptacles at the breaker box prior to installing the spacers. You can do this with the power on, but you’ll need to know what to touch and what not to touch. If you’re not 100% certain, cut the power at the breaker box.
Why You Need Electrical Outlet Spacers
Here are a few of the reasons that you should use outlet spacers:
- Loose receptacles could result in arcing.
- You want that professionally installed look. It’s the small details that make it all come together.
- They provide support for your outlets when plugging in devices.
- A receptacle that is not flush will result in cracked or broken faceplates.
- You may find yourself in violation of a building code if you leave your receptacles recessed.
The electrical outlet spacers that I purchased are Made in the USA and UL listed. Those are 2 very good reasons to buy them!
Be sure not to touch the sides of the receptacle. You’ll get a nasty jolt if you haven’t disabled the electricity flow.
What’s cool about this product is that these spacers can be piggy-backed (just like Legos) to any desired depth — so if you’re installing stone, tile, or rock on your walls, you can put a few of them together to make it right.
More DIY Home Electrical Tips
Like this post? Save it to read again later… or share with others on Pinterest!
I started as a home-stalker… visiting brand new homes under construction in the neighborhoods near my house. That inspired me to write about home building and home renovation projects — chronicling homes during different phases of construction from a consumer’s point-of-view. Basically, the tips you’ll find in my articles are a collection of checklists for what I think should (and should not) go into building or remodeling a quality home.